Weight and Mass

Long Tons to Stone Converter

Convert long tons (LT) to stone (st). 1 imperial ton = 160 stone (exact)

1 imperial ton (long ton) = 160 stone

How to convert long tons to stone

Formulast = LT × 160

Multiply the value in long tons by 160. To go the other way, multiply by 0.00625 (or divide by 160).

An imperial ton is larger than a stone: one imperial ton contains 160 stone.

Worked examples

  • 1 imperial ton (long ton)1 LT × 160 = 160 st
  • 5 long tons5 LT × 160 = 800 st
  • 10 long tons10 LT × 160 = 1,600 st
  • 20 long tons20 LT × 160 = 3,200 st
  • 100 long tons100 LT × 160 = 16,000 st

Long tons to stone conversion table

Values are calculated by the conversion engine and rounded to 8 significant figures.

Long tons to stone: 0.1–10 LT
Long tons (LT)Stone (st)
0.1 LT16 st
0.25 LT40 st
0.5 LT80 st
1 LT160 st
2 LT320 st
3 LT480 st
4 LT640 st
5 LT800 st
6 LT960 st
7 LT1,120 st
8 LT1,280 st
9 LT1,440 st
10 LT1,600 st
Long tons to stone: 12–1,000 LT
Long tons (LT)Stone (st)
12 LT1,920 st
15 LT2,400 st
20 LT3,200 st
25 LT4,000 st
30 LT4,800 st
40 LT6,400 st
50 LT8,000 st
75 LT12,000 st
100 LT16,000 st
250 LT40,000 st
500 LT80,000 st
1,000 LT160,000 st

About the units

Imperial ton (LT)

2,240 lb (1,016.0469088 kg), historically used in the UK. One imperial ton equals 1,016.046909 kilograms (kg).

Stone (st)

Fourteen pounds (6.35029318 kg). Body weight in the UK and Ireland is often quoted in stones and pounds.

Frequently asked questions

How many stone are in one imperial ton?

There are 160 stone in one imperial ton, and this value is exact by definition.

How do I convert long tons to stone?

Multiply the number of long tons by 160. For example, 10 LT × 160 = 1,600 st.

How many long tons are in one stone?

One stone equals 0.00625 long tons. That is the reverse factor, 1 ÷ 160.

What is 10 long tons in stone?

10 LT = 1,600 st.

Is this LT to st converter accurate?

Yes. Both units are defined exactly in terms of SI units, so the conversion factor is exact; results are shown to 12 significant figures by default and you can change precision in the converter. Calculations run in your browser using the same tested engine that generated this page.

Try “psi to bar”, “cups”, “binary” or “5 ft in cm”.