Length

Feet to Mils Converter

Convert feet (ft) to mils (mil). 1 foot = 12,000 mils (exact)

1 foot = 12,000 mils

How to convert feet to mils

Formulamil = ft × 12,000

Multiply the value in feet by 12,000. To go the other way, multiply by 0.00008333333333 (or divide by 12,000).

A foot is larger than a mil: one foot contains 12,000 mils.

Worked examples

  • 1 foot1 ft × 12,000 = 12,000 mil
  • 5 feet5 ft × 12,000 = 60,000 mil
  • 10 feet10 ft × 12,000 = 120,000 mil
  • 20 feet20 ft × 12,000 = 240,000 mil
  • 100 feet100 ft × 12,000 = 1,200,000 mil

Feet to mils conversion table

Values are calculated by the conversion engine and rounded to 8 significant figures.

Feet to mils: 0.1–10 ft
Feet (ft)Mils (mil)
0.1 ft1,200 mil
0.25 ft3,000 mil
0.5 ft6,000 mil
1 ft12,000 mil
2 ft24,000 mil
3 ft36,000 mil
4 ft48,000 mil
5 ft60,000 mil
6 ft72,000 mil
7 ft84,000 mil
8 ft96,000 mil
9 ft108,000 mil
10 ft120,000 mil
Feet to mils: 12–1,000 ft
Feet (ft)Mils (mil)
12 ft144,000 mil
15 ft180,000 mil
20 ft240,000 mil
25 ft300,000 mil
30 ft360,000 mil
40 ft480,000 mil
50 ft600,000 mil
75 ft900,000 mil
100 ft1,200,000 mil
250 ft3,000,000 mil
500 ft6,000,000 mil
1,000 ft12,000,000 mil

About the units

Foot (ft)

Exactly 0.3048 m, or 12 inches. Feet are used in the US for height, room dimensions and aircraft altitude; a standard ceiling is 8 ft.

Mil (mil)

One thousandth of an inch (0.0254 mm). Used for plastic-film and coating thickness and machining tolerances. One mil equals 0.0000254 meters (m).

Frequently asked questions

How many mils are in one foot?

There are 12,000 mils in one foot, and this value is exact by definition.

How do I convert feet to mils?

Multiply the number of feet by 12,000. For example, 10 ft × 12,000 = 120,000 mil.

How many feet are in one mil?

One mil equals 0.00008333333333 feet. That is the reverse factor, 1 ÷ 12,000.

What is 10 feet in mils?

10 ft = 120,000 mil.

Is this ft to mil converter accurate?

Yes. Both units are defined exactly in terms of SI units, so the conversion factor is exact; results are shown to 12 significant figures by default and you can change precision in the converter. Calculations run in your browser using the same tested engine that generated this page.

Try “psi to bar”, “cups”, “binary” or “5 ft in cm”.