Data Storage

Bits to MB Converter

Convert bits (b) to megabytes (MB). 1 bit = 1.25×10⁻⁷ megabytes (exact)

1 bit = 1.25×10⁻⁷ megabytes

How to convert bits to megabytes

FormulaMB = b × 1.25×10⁻⁷

Because one megabyte equals 8,000,000 bits, you can also divide: MB = b ÷ 8,000,000.

A bit is smaller than a megabyte: it takes 8,000,000 bits to make one megabyte.

Worked examples

  • 1 bit1 b × 1.25×10⁻⁷ = 1.25×10⁻⁷ MB
  • 5 bits5 b × 1.25×10⁻⁷ = 6.25×10⁻⁷ MB
  • 10 bits10 b × 1.25×10⁻⁷ = 0.00000125 MB
  • 20 bits20 b × 1.25×10⁻⁷ = 0.0000025 MB
  • 100 bits100 b × 1.25×10⁻⁷ = 0.0000125 MB

Bits to megabytes conversion table

Values are calculated by the conversion engine and rounded to 8 significant figures.

Bits to megabytes: 0.1–10 b
Bits (b)Megabytes (MB)
0.1 b1.25×10⁻⁸ MB
0.25 b3.125×10⁻⁸ MB
0.5 b6.25×10⁻⁸ MB
1 b1.25×10⁻⁷ MB
2 b2.5×10⁻⁷ MB
3 b3.75×10⁻⁷ MB
4 b5×10⁻⁷ MB
5 b6.25×10⁻⁷ MB
6 b7.5×10⁻⁷ MB
7 b8.75×10⁻⁷ MB
8 b0.000001 MB
9 b0.000001125 MB
10 b0.00000125 MB
Bits to megabytes: 12–1,000 b
Bits (b)Megabytes (MB)
12 b0.0000015 MB
15 b0.000001875 MB
20 b0.0000025 MB
25 b0.000003125 MB
30 b0.00000375 MB
40 b0.000005 MB
50 b0.00000625 MB
75 b0.000009375 MB
100 b0.0000125 MB
250 b0.00003125 MB
500 b0.0000625 MB
1,000 b0.000125 MB

About the units

Bit (b)

A single binary digit, 0 or 1.

Megabyte (MB)

1,000,000 bytes (decimal). A minute of MP3 audio is about 1 MB. One megabyte equals 8,000,000 bits (b).

Frequently asked questions

How many megabytes are in one bit?

There are 1.25×10⁻⁷ megabytes in one bit, and this value is exact by definition.

How do I convert bits to megabytes?

Multiply the number of bits by 1.25×10⁻⁷. For example, 10 b × 1.25×10⁻⁷ = 0.00000125 MB.

How many bits are in one megabyte?

One megabyte equals 8,000,000 bits. That is the reverse factor, 1 ÷ 1.25×10⁻⁷.

What is 10 bits in megabytes?

10 b = 0.00000125 MB.

Is this b to MB converter accurate?

Yes. Both units are defined exactly in terms of SI units, so the conversion factor is exact; results are shown to 12 significant figures by default and you can change precision in the converter. Calculations run in your browser using the same tested engine that generated this page.

Try “psi to bar”, “cups”, “binary” or “5 ft in cm”.