Weight and Mass

Pounds to US Tons Converter

Convert pounds (lb) to US tons (ton). 1 pound = 0.0005 US tons (exact)

1 pound = 0.0005 US tons

How to convert pounds to US tons

Formulaton = lb × 0.0005

Multiply the value in pounds by 0.0005. To go the other way, multiply by 2,000 (or divide by 0.0005).

A pound is smaller than an US ton: it takes 2,000 pounds to make one US ton.

Worked examples

  • 1 pound1 lb × 0.0005 = 0.0005 ton
  • 5 pounds5 lb × 0.0005 = 0.0025 ton
  • 10 pounds10 lb × 0.0005 = 0.005 ton
  • 20 pounds20 lb × 0.0005 = 0.01 ton
  • 100 pounds100 lb × 0.0005 = 0.05 ton

Pounds to US tons conversion table

Values are calculated by the conversion engine and rounded to 8 significant figures.

Pounds to US tons: 0.1–10 lb
Pounds (lb)US tons (ton)
0.1 lb0.00005 ton
0.25 lb0.000125 ton
0.5 lb0.00025 ton
1 lb0.0005 ton
2 lb0.001 ton
3 lb0.0015 ton
4 lb0.002 ton
5 lb0.0025 ton
6 lb0.003 ton
7 lb0.0035 ton
8 lb0.004 ton
9 lb0.0045 ton
10 lb0.005 ton
Pounds to US tons: 12–1,000 lb
Pounds (lb)US tons (ton)
12 lb0.006 ton
15 lb0.0075 ton
20 lb0.01 ton
25 lb0.0125 ton
30 lb0.015 ton
40 lb0.02 ton
50 lb0.025 ton
75 lb0.0375 ton
100 lb0.05 ton
250 lb0.125 ton
500 lb0.25 ton
1,000 lb0.5 ton

About the units

Pound (lb)

The avoirdupois pound, exactly 0.45359237 kg, divided into 16 ounces. The standard US unit for body weight and groceries.

US ton (ton)

2,000 lb (907.18474 kg). The usual meaning of “ton” in the United States.

Frequently asked questions

How many US tons are in one pound?

There are 0.0005 US tons in one pound, and this value is exact by definition.

How do I convert pounds to US tons?

Multiply the number of pounds by 0.0005. For example, 10 lb × 0.0005 = 0.005 ton.

How many pounds are in one US ton?

One US ton equals 2,000 pounds. That is the reverse factor, 1 ÷ 0.0005.

What is 10 pounds in US tons?

10 lb = 0.005 ton.

Is this lb to ton converter accurate?

Yes. Both units are defined exactly in terms of SI units, so the conversion factor is exact; results are shown to 12 significant figures by default and you can change precision in the converter. Calculations run in your browser using the same tested engine that generated this page.

Try “psi to bar”, “cups”, “binary” or “5 ft in cm”.