Kinematic Viscosity

Stokes to Centistokes Converter

Convert stokes (St) to centistokes (cSt). 1 stokes = 100 centistokes (exact)

1 stokes = 100 centistokes

How to convert stokes to centistokes

FormulacSt = St × 100

Multiply the value in stokes by 100. To go the other way, multiply by 0.01 (or divide by 100).

A stokes is larger than a centistokes: one stokes contains 100 centistokes.

Worked examples

  • 1 stokes1 St × 100 = 100 cSt
  • 5 stokes5 St × 100 = 500 cSt
  • 10 stokes10 St × 100 = 1,000 cSt
  • 20 stokes20 St × 100 = 2,000 cSt
  • 100 stokes100 St × 100 = 10,000 cSt

Stokes to centistokes conversion table

Values are calculated by the conversion engine and rounded to 8 significant figures.

Stokes to centistokes: 0.1–10 St
Stokes (St)Centistokes (cSt)
0.1 St10 cSt
0.25 St25 cSt
0.5 St50 cSt
1 St100 cSt
2 St200 cSt
3 St300 cSt
4 St400 cSt
5 St500 cSt
6 St600 cSt
7 St700 cSt
8 St800 cSt
9 St900 cSt
10 St1,000 cSt
Stokes to centistokes: 12–1,000 St
Stokes (St)Centistokes (cSt)
12 St1,200 cSt
15 St1,500 cSt
20 St2,000 cSt
25 St2,500 cSt
30 St3,000 cSt
40 St4,000 cSt
50 St5,000 cSt
75 St7,500 cSt
100 St10,000 cSt
250 St25,000 cSt
500 St50,000 cSt
1,000 St100,000 cSt

About the units

Stokes (St)

1 cm²/s. One stokes equals 0.0001 square meters per second (m²/s).

Centistokes (cSt)

Equal to 1 mm²/s; the usual unit for oil viscosity grades. Water at 20 °C is about 1.0 cSt. One centistokes equals 0.000001 square meters per second (m²/s).

Frequently asked questions

How many centistokes are in one stokes?

There are 100 centistokes in one stokes, and this value is exact by definition.

How do I convert stokes to centistokes?

Multiply the number of stokes by 100. For example, 10 St × 100 = 1,000 cSt.

How many stokes are in one centistokes?

One centistokes equals 0.01 stokes. That is the reverse factor, 1 ÷ 100.

What is 10 stokes in centistokes?

10 St = 1,000 cSt.

Is this St to cSt converter accurate?

Yes. Both units are defined exactly in terms of SI units, so the conversion factor is exact; results are shown to 12 significant figures by default and you can change precision in the converter. Calculations run in your browser using the same tested engine that generated this page.

Try “psi to bar”, “cups”, “binary” or “5 ft in cm”.