Capacitance

Nanofarads to Farads Converter

Convert nanofarads (nF) to farads (F). 1 nanofarad = 1×10⁻⁹ farads (exact)

1 nanofarad = 1×10⁻⁹ farads

How to convert nanofarads to farads

FormulaF = nF × 1×10⁻⁹

Multiply the value in nanofarads by 1×10⁻⁹. To go the other way, multiply by 1,000,000,000 (or divide by 1×10⁻⁹).

A nanofarad is smaller than a farad: it takes 1,000,000,000 nanofarads to make one farad.

Worked examples

  • 1 nanofarad1 nF × 1×10⁻⁹ = 1×10⁻⁹ F
  • 5 nanofarads5 nF × 1×10⁻⁹ = 5×10⁻⁹ F
  • 10 nanofarads10 nF × 1×10⁻⁹ = 1×10⁻⁸ F
  • 20 nanofarads20 nF × 1×10⁻⁹ = 2×10⁻⁸ F
  • 100 nanofarads100 nF × 1×10⁻⁹ = 1×10⁻⁷ F

Nanofarads to farads conversion table

Values are calculated by the conversion engine and rounded to 8 significant figures.

Nanofarads to farads: 0.1–10 nF
Nanofarads (nF)Farads (F)
0.1 nF1×10⁻¹⁰ F
0.25 nF2.5×10⁻¹⁰ F
0.5 nF5×10⁻¹⁰ F
1 nF1×10⁻⁹ F
2 nF2×10⁻⁹ F
3 nF3×10⁻⁹ F
4 nF4×10⁻⁹ F
5 nF5×10⁻⁹ F
6 nF6×10⁻⁹ F
7 nF7×10⁻⁹ F
8 nF8×10⁻⁹ F
9 nF9×10⁻⁹ F
10 nF1×10⁻⁸ F
Nanofarads to farads: 12–1,000 nF
Nanofarads (nF)Farads (F)
12 nF1.2×10⁻⁸ F
15 nF1.5×10⁻⁸ F
20 nF2×10⁻⁸ F
25 nF2.5×10⁻⁸ F
30 nF3×10⁻⁸ F
40 nF4×10⁻⁸ F
50 nF5×10⁻⁸ F
75 nF7.5×10⁻⁸ F
100 nF1×10⁻⁷ F
250 nF2.5×10⁻⁷ F
500 nF5×10⁻⁷ F
1,000 nF0.000001 F

About the units

Nanofarad (nF)

The nanofarad (nF) is a unit of capacitance in the International System of Units (SI). One nanofarad equals 1×10⁻⁹ farads (F).

Farad (F)

One coulomb per volt.

Frequently asked questions

How many farads are in one nanofarad?

There are 1×10⁻⁹ farads in one nanofarad, and this value is exact by definition.

How do I convert nanofarads to farads?

Multiply the number of nanofarads by 1×10⁻⁹. For example, 10 nF × 1×10⁻⁹ = 1×10⁻⁸ F.

How many nanofarads are in one farad?

One farad equals 1,000,000,000 nanofarads. That is the reverse factor, 1 ÷ 1×10⁻⁹.

What is 10 nanofarads in farads?

10 nF = 1×10⁻⁸ F.

Is this nF to F converter accurate?

Yes. Both units are defined exactly in terms of SI units, so the conversion factor is exact; results are shown to 12 significant figures by default and you can change precision in the converter. Calculations run in your browser using the same tested engine that generated this page.

Try “psi to bar”, “cups”, “binary” or “5 ft in cm”.