Capacitance

Farads to Microfarads Converter

Convert farads (F) to microfarads (µF). 1 farad = 1,000,000 microfarads (exact)

1 farad = 1,000,000 microfarads

How to convert farads to microfarads

FormulaµF = F × 1,000,000

Multiply the value in farads by 1,000,000. To go the other way, multiply by 0.000001 (or divide by 1,000,000).

A farad is larger than a microfarad: one farad contains 1,000,000 microfarads.

Worked examples

  • 1 farad1 F × 1,000,000 = 1,000,000 µF
  • 5 farads5 F × 1,000,000 = 5,000,000 µF
  • 10 farads10 F × 1,000,000 = 10,000,000 µF
  • 20 farads20 F × 1,000,000 = 20,000,000 µF
  • 100 farads100 F × 1,000,000 = 100,000,000 µF

Farads to microfarads conversion table

Values are calculated by the conversion engine and rounded to 8 significant figures.

Farads to microfarads: 0.1–10 F
Farads (F)Microfarads (µF)
0.1 F100,000 µF
0.25 F250,000 µF
0.5 F500,000 µF
1 F1,000,000 µF
2 F2,000,000 µF
3 F3,000,000 µF
4 F4,000,000 µF
5 F5,000,000 µF
6 F6,000,000 µF
7 F7,000,000 µF
8 F8,000,000 µF
9 F9,000,000 µF
10 F10,000,000 µF
Farads to microfarads: 12–1,000 F
Farads (F)Microfarads (µF)
12 F12,000,000 µF
15 F15,000,000 µF
20 F20,000,000 µF
25 F25,000,000 µF
30 F30,000,000 µF
40 F40,000,000 µF
50 F50,000,000 µF
75 F75,000,000 µF
100 F100,000,000 µF
250 F250,000,000 µF
500 F500,000,000 µF
1,000 F1,000,000,000 µF

About the units

Farad (F)

One coulomb per volt.

Microfarad (µF)

The microfarad (µF) is a unit of capacitance in the International System of Units (SI). One microfarad equals 0.000001 farads (F).

Frequently asked questions

How many microfarads are in one farad?

There are 1,000,000 microfarads in one farad, and this value is exact by definition.

How do I convert farads to microfarads?

Multiply the number of farads by 1,000,000. For example, 10 F × 1,000,000 = 10,000,000 µF.

How many farads are in one microfarad?

One microfarad equals 0.000001 farads. That is the reverse factor, 1 ÷ 1,000,000.

What is 10 farads in microfarads?

10 F = 10,000,000 µF.

Is this F to µF converter accurate?

Yes. Both units are defined exactly in terms of SI units, so the conversion factor is exact; results are shown to 12 significant figures by default and you can change precision in the converter. Calculations run in your browser using the same tested engine that generated this page.

Try “psi to bar”, “cups”, “binary” or “5 ft in cm”.